Impro Fluidtek
  • Home
  • Markets
  • Products
        • Products

          • Orbital Motor
          • Brake & Release Pump

          Orbital Motors

          The Impro Fluidtek orbital motors with the roller gear set design are resulting in a reliable, efficient and durable motor for diverse end markets.

          Coming soon

  • About
    • About Impro Fluidtek
    • Company Milestones
    • Values
    • News
  • Contact
  • 中文

products

Home > Products > Orbital Motor > Medium Duty Motor – Product Line RE/RC

Medium Duty Motor – Product Line RE/RC

RE Series motors offer the perfect compromise between price and performance by producing work horse power at a reasonable cost. Although these motors perform well in a wide range of applications, they are especially suited for low flow, high pressure applications. During startup, pressure causes the balance plate to flex toward the rotor, vastly improving volumetric efficiency. As the motor reaches operating pressure, the balance plate relaxes, allowing the rotor to turn freely which translates into higher mechanical efficiencies. Transmitting this power to the output shaft is the most durable drive link in its class. Four bearing options, combined with standard mounting flanges and output shafts, allow the motor to be configured to suit nearly any application.

Features / Benefits

  • High Pressure Shaft Seal offers superior seal life and performance and eliminates need for case drain.
  • Three Bearing Options allow load carrying capability of motor to be matched to application.
  • Heavy-Duty Drive Link is the most durable in its class and receives full flow lubrication to provide long life.
  • Valve-In-Rotor Design provides cost effective, efficient distribution of oil and reduces overall motor length.
  • Pressure-Compensated Balance Plate improves volumetric efficiency at low flows and high pressure.
  • Sensoring optional.

Attachments

Data Sheet
RE/RC Series

Technical Data

  • Metric Units
  • U.S. Units
* Note the table below is the metric unit table
Product Code Displacement
[cm³/rev]
Max. Speed [RPM] Max. Flow [l/min] Max. Torque [Nm] Max. Pressure [bar]
cont. inter. cont. inter. cont. inter. cont. inter. peak
RE 120 121 360 490 45 61 327 383 207 241 276
RE 160 162 370 470 61 76 475 542 207 241 276
RE 200 204 300 370 68 83 542 633 207 241 276
RE 230 232 260 320 68 83 644 712 207 241 276
RE 260 261 260 350 76 91 712 791 207 241 276
RE 300 300 250 320 83 95 825 938 207 241 276
RE 350 348 220 270 83 95 921 1045 207 241 276
RE 375 375 200 250 76 91 1006 1158 207 241 276
RE 470 465 160 200 76 91 1096 1184 172 189 207
RE 540 536 140 170 76 91 983 1243 138 173 207
RE 620 631 120 150 76 91 1014 1291 121 155 173
RE 750 748 100 130 76 91 1062 1237 103 121 138
Performance data is typical. Performance of production units varies slightly from one motor to another. Running at intermittent ratings should not exceed 10% of every minute of operation.
General
Temperature Range -30°C – 85°C Optimal Viscosity20 – 43 cSt FiltrationMin. ISO 17-14
* Note the table below is the US unit table
Product Code Displacement
[in³/rev]
Max. Speed [RPM] Max. Flow [gpm] Max. Torque [lb-in] Max. Pressure [psi]
cont. inter. cont. inter. cont. inter. cont. inter. peak
RE 120 7.4 360 490 12 16 2900 3400 3000 3500 4000
RE 160 9.9 370 470 16 20 4200 4800 3000 3500 4000
RE 200 12.4 300 370 18 22 4800 5600 3000 3500 4000
RE 230 14.2 260 320 18 22 5700 6300 3000 3500 4000
RE 260 15.9 260 350 20 24 6300 7000 3000 3500 4000
RE 300 18.3 250 320 22 25 7300 8300 3000 3500 4000
RE 350 21.2 220 270 22 25 8150 9250 3000 3500 4000
RE 375 22.8 200 250 20 24 8900 10250 3000 3500 4000
RE 470 28.3 160 200 20 24 9700 10475 2500 2750 3000
RE 540 32.7 140 170 20 24 8700 11000 2000 2500 3000
RE 620 38.5 120 150 20 24 8976 11421 1750 2250 2500
RE 750 45.6 100 130 20 24 9400 10950 1500 1750 2000
Performance data is typical. Performance of production units varies slightly from one motor to another. Running at intermittent ratings should not exceed 10% of every minute of operation.
General
Temperature Range -22°F – 185°F Optimal Viscosity100 – 200 S.U.S. FiltrationMin. ISO 17-14

Typical Applications

  • Medium-duty wheel drives
  • Augers
  • Mixers
  • Winch drives
  • Swing drives
  • Grapple heads
  • Feed rollers
  • Broom drives
  • And more

Markets

Agricultural & Forestry Machines
Commercial & Road Vehicles
Material Handling & Equipment
Bulk Materials Handling

Products

  • Orbital Motor
  • Brake & Release Pump

Ready to talk?

CONTACT IMPRO FLUIDTEK

Ready to talk?

  • Products
  • Markets
  • About
  • Contact
  • Improprecision.com
TERMS OF USE| PRIVACY POLICY| SITE MAP| TERMS AND CONDITIONS OF SALE
Copyright © 2023 Impro Fluidtek. All Rights Reserved.