Home > Products > Orbital Motor > Heavy Duty Motor – Product Line WS 360

Heavy Duty Motor – Product Line WS 360

The WS targets agricultural equipment, skid steer attachments, and other applications that require greater torque under demanding conditions. Additional product features include a three zone commutator valve, heavy-duty tapered roller bearings, and case drain with integral internal drain. The WS offers numerous housing, displacement and shaft options to meet most common SAE and European requirements.

Features / Benefits

  • Twelve shaft and ten mounting options to meet the most common SAE and European requirements.
  • Heavy- duty tapered roller bearings for extra side load capacity.
  • Three zone commutator valve for high flow capacity.
  • Standard case drain with integral internal drain for extended shaft seal life.

Attachments

Data Sheet
WS Series
CAD File (.stp)
WS 360 Short WS 360 Standard WS 360 Ultra Short

Technical Data

  • Metric Units
  • U.S. Units
* Note the table below is the metric unit table
Product Code Displacement
[cm³/rev]		 Max. Speed [RPM] Max. Flow [l/min] Max. Torque [Nm] Max. Pressure [bar]
cont. inter. cont. inter. cont. inter. cont. inter. peak
WS 80 80 793 979 65 80 234 306 210 275 295
WS 100 100 744 887 75 90 301 392 210 275 295
WS 125 125 596 711 75 90 364 478 210 275 295
WS 160 160 471 561 75 90 466 577 210 260 280
WS 200 200 377 448 75 90 599 705 210 250 270
WS 230 226 324 389 75 90 652 812 200 250 270
WS 250 250 298 363 75 90 703 851 200 250 270
WS 315 305 240 293 75 90 872 1024 200 240 260
WS 400 393 185 225 75 90 910 1069 160 190 210
WS 500 493 149 180 75 90 848 1001 120 140 160
Performance data is typical. Performance of production units varies slightly from one motor to another. Running at intermittent ratings should not exceed 10% of every minute of operation.
General
Temperature Range -30°C – 83°C Optimal Viscosity20 – 43 cSt FiltrationMin. ISO 17-14
* Note the table below is the US unit table
Product Code Displacement
[in³/rev]		 Max. Speed [RPM] Max. Flow [gpm] Max. Torque [lb-in] Max. Pressure [psi]
cont. inter. cont. inter. cont. inter. cont. inter. peak
WS 80 4.9 793 979 17 21 2071 2708 3050 3990 4280
WS 100 6.1 744 887 20 24 2664 3470 3050 3990 4280
WS 125 7.6 596 711 20 24 3222 4231 3050 3990 4280
WS 160 9.7 471 561 20 24 4125 5107 3050 3770 4060
WS 200 12.2 377 448 20 24 5302 6240 3050 3630 3920
WS 230 13.8 324 389 20 24 5771 7187 2900 3630 3920
WS 250 15.2 298 363 20 24 6222 7532 2900 3630 3920
WS 315 18.6 240 293 20 24 7718 9063 2900 3480 3770
WS 400 24.0 185 225 20 24 8054 9462 2320 2760 3050
WS 500 30.1 149 180 20 24 7506 8860 1740 2030 2320
Performance data is typical. Performance of production units varies slightly from one motor to another. Running at intermittent ratings should not exceed 10% of every minute of operation.
General
Temperature Range -22°F – 181°F Optimal Viscosity100 – 200 S.U.S. FiltrationMin. ISO 17-14

Typical Applications

  • Heavy-duty wheel drives
  • Sweepers
  • Grain augers
  • Spreaders
  • Feed rollers
  • Brush drives
  • Mowers
  • Harvesting equipment
  • And more

Markets

Agricultural & Forestry Machines
Commercial & Road Vehicles
Material Handling & Equipment
Bulk Materials Handling